Ducati Hypermotard 950, Owner'S Manual

Page: 47 / 288

Light control
Low/high beam (version without DRL)
At Key-On, the high beam and low beam lights are
OFF: only the parking lights are turned on.
When the engine is started the low beam is
automatically switched on. It is possible to switch
from low to high beam and vice versa with button
(7),positions (B) and (A), or flash with button (3). If
engine is not started upon key-on, it is anyway
possible to switch low/high beams on by pushing
button (7), positions (B) and (A), or flash with button
(3) on LH switch.
If within 60 seconds from the manual switching on of
the low / high beam the engine is not started, the
lights are disabled again (off).
To preserve the motorcycle battery, if when starting
the engine the high/low beams are on, the headlight
is automatically switched off and then on again
when the engine is started.
Low/high beam (version with DRL)
At Key-On, the high beam and low beam lights are
OFF: only the parking lights and the DRL light are
turned on.
After starting the engine the low beam is
automatically switched on if the AUTO mode is set
and the instrument panel detects poor ambient light
(NIGHT): if, on the other hand, the instrument panel
detects good light conditions (DAY), the DRL light
remains on and the low beam remains off.
If within 60 seconds from the “manual” switching on
of the low / high beam the engine is not started, the
lights are disabled again (off).
It the low beam is activated, it is possible to switch on
the high beam with button (7, Fig 21) position (A), or
flash with button (3, Fig 21).
A
B
7
3
Fig 21
46