Ducati Hypermotard 950, Owner'S Manual

Page: 279 / 288

Important
The above gear ratios are the homologated
ones and under no circumstances must they be
modified.
However, if you wish to tune up your motorcycle for
competitions or special tracks, Ducati Motor Holding
S.p.A. will be pleased to provide information about
the special ratios available. Contact a Ducati Dealer
or Authorised Service Centre.
Attention
If the rear sprocket needs replacing, contact a
Ducati Dealer or authorised Service Centre.
If improperly replaced, this component could
seriously endanger your safety, as well as the
passenger one, and cause irreparable damage to
your motorcycle.
Frame
Steel tubular trellis with 34 mm main tubes.
Steel rear subframe.
Steering head angle: 25.5°.
Steering angle: 35° LH side / 35° RH side.
Trail: 104 mm (4.09 in).
Wheels
Front
Light-alloy rims with 3 Y-shaped spokes.
Size: MT3.50x17" M/C
Rear
Light-alloy rims with 3 Y-shaped spokes.
Size: MT5.50x17" M/C
Both wheel shafts can be removed.
Tyres
Tyre type
Front
Pirelli Diablo Rosso III "tubeless" radial type.
Size:
120/70-ZR17 M/C (58W).
Rear
Pirelli Diablo Rosso III "tubeless" radial type.
Size:
180/55-ZR17 M/C (75W) TL (D).
TYRE PRESSURE
Front tyre pressure:
2.50 bar (rider only) - 2.50 bar (full load).
Rear tyre pressure:
2.50 bar (rider only) - 2.90 bar (full load).
278