![background image](http://html1.mh-extra.com/html/ducati/hypermotard-950/hypermotard-950_owners-manual_2537654171.webp)
Once the last digit has been entered, when pressing
button (4) the instrument panel activates the
following indications:
●
< Back
●
Memory (orange)
To exit the menu and go back to previous page
without saving the set code, highlight the "< Back"
indication and press button (4).
To memorise the entered code, highlight the
"Memory" indication (orange) and press button (4)
Then, the instrument panel will activate the
“Memorised” indication (green) for 2 seconds.
At the end of the 2 seconds, the instrument panel
goes back to the previous screen with the indication
“Modify Pin” (instead of “New Pin”): in fact, after
memorising the first Pin Code, the page of the menu
where to enter the “New Pin” is no longer available
and is replaced by the page to modify the Pin Code.
Note
The page for entering the PIN CODE is active
and available again only in case the Pin Code
function is reset (but this is only possible through the
DUCATI diagnosis instrument).
< Back
Memory
7 8 4 6
...
...
...
1
2
4
Fig 121
Memorised
...
...
...
Fig 122
170
Summary of Contents for Hypermotard 950
