51
8. Error Messages
Special error messages are output during executing the device function to the wrong signal
line connection or parameter setting.
For the error messages other than described in this chapter, please refer to NETIMPRESS
next Instruction Manual.
8.1 List of Error Messages
Table 8.1. List of Error Messages Specific to FR830
Error Message
Causes & Measures
1120
YDD
FILE
NOT
FOUND
Cause
There is no YDD file, or there is more than one YDD
files are placed.
Measure
Check if YDD file is placed correctly.
For YDD file, see Chapter 4.
1121
YDD
FILE
OPEN
ERROR
Cause
Failed to open YDD file.
Measure
Check if YDD file is placed correctly.
For YDD file, see Chapter 4.
1122
YDD FILE FORMAT
ERROR
Cause
There is a problem in YDD file setting value.
Measure
Check the contents of YDD file.
For YDD file, see Chapter 4.
1123
WARNNING
SECURITY SETTING
Cause
In the operation mode with invalid security setting, any
of the security setting value of YDD file is set to inhibit.
Measure
Turn on the operation mode with valid security setting or
change the security setting value of YDD file.
For YDD file, see Chapter 4.
1124
S ID NOMATCH ERR
Cause
Serial programming ID set to the device and the serial
programming ID in YDD file for authentication are
different.
Measure
Check the contents of YDD file.
For YDD file, see Chapter 4.
1125
SIG NOMATCH ERR
Cause
Signature is not correct.
Measure
Check if the parameter file is for the target
microcomputer.
1126
NO SID ERR
Cause
Serial programming ID for authentication is not set to
YDD file.
Measure
Check the contents of YDD file.
For YDD file, see Chapter 4.
