12
(8) MCU Type [FUNC D8]
The setting here will be displayed in the MCU Type field located at the top left of the Remote
Controller window and NET IMPRESS main unit.
You can enter any characters up to 16 characters such as microcomputer’s model name or
device name you are using.
For how to change displayed model name, see the NETIMPRESS next Instruction Manual at
section 5.4.10. “Customize Displayed Model Name”.
(9) OK
By clicking this OK button, you can send the settings on the Parameter Table 1 tab to the
Control Module. Be sure to click the OK button before moving to other tabs so that you can
make the changes of (1) – (8) valid.
If you do not click the OK button, the changes will not be sent to the Control Module.
