CAN Interface Specification
057-281 ISSUE: 1
Page 50 of 58
8.1.2 RECEIVED MESSAGES
The following messages are sent to the DSEA108 specific node address (PDU Specific).
Priority
Ext Data Page
Data Page
PDU Format
PDU Specific
Size (Bytes)
Rate
3
0
0
EF
DSEA108 address
8
50 ms
Configuration Item
Byte / Bit
Scaling
Offset
Units
Voltage Bias
Byte 1 to 2
0.1 %/bit
-100 %
%
Alternative Configuration
Byte 3
0:
Main Configuration
1 to 5:
Alternative Configuration 1 to 5
N/A
N/A
Stability Selection
Byte 4
0:
Stability Selection 1
1:
Stability Selection 2
FF:
Maintain Existing Stability Selection
N/A
N/A
Not Used
Byte 7 to 8
N/A
N/A
N/A
8.1.2.1
VOLTAGE BIAS
NOTE: If no message is received by the AVR within 200 ms, Voltage Bias defaults to 0 %.
This value allows the voltage setpoint to be biased.
When writing to this PGN and it is desired to continue with the existing bias value, set Voltage Bias to
0xFFFF (Decimal 65535).
8.1.3 ALTERNATIVE CONFIGURATION
Where enabled in the DSEA108 Configuration, this allows the default configuration to be selected.
Selecting a disabled configuration or attempting to select a configuration when this feature is disabled
results in the DSEA108 continuing to use the previously selected configuration.
8.1.4 STABILITY SELECTION
Where enabled in the DSEA108 Configuration, this allows the Stability Selection to be adjusted.
If this function is disabled, the DSEA108 continues to use the previously selected option.
