CAN Interface Specification
Page 55 of 58
057-281 ISSUE: 1
8.2.4.2
DIP SWITCH POSITION LIST
DIP Switch Positions
(Address 208) are described as follows:
Bit
Description
0,1
Switch 1 (Stability selection)
2,3
Switch 2 (Alternative Configuration Selection)
4,5
Switch 3 (Alternative Configuration Selection)
6,7
Switch 4 (Alternative Configuration Selection)
8 to 31
Not Used (all bits set to 1)
Where the status is shown by the following bit patterns:
Value (binary)
Meaning
00
Off
01
On
10
Error (Not Used)
11
Unimplemented
