20
Chapter 6: Zone Labels
6 A: Editing Zone Labels
Zone Labels may only be edited by entering the "Installer’s Programming" Mode, see Section 5A,
and then accessing the "System Functions".
Zone Labels are messages assigned to each Zone displayed on the Keypad. Zone Labels may be
programmed to suit the user’s needs and to make the information the system provides more
useful. For example, the label “Zone 1” could be changed to read “Front Door”. Each Zone Label
may contain letters, numbers, spaces and ASCII characters, up to 16 per label or zone.
Chapter 6: Zone Labels
Enter the Installer’s Programming Mode as
described in 5 A: How to Enter the Installer’s
Programming Mode.
Use the
-NO Key to scroll to this message.
When this message is displayed, press the
-YES Key.
Use the
-NO Key to scroll to this message.
When this message is displayed, press the
-YES Key.
When the
-YES Key is pressed, the label
of the first Zone will be displayed, along with
a message asking if the label shown is to be
edited. Press the
-NO Key to scroll
through the list of Zone labels, or press the
-YES Key to edit the label shown.
When a label is selected for editing, the
Label Editing Message will display the
current Zone Label, and a cursor will appear
under the first letter in the Label. Use the
-YES and
-NO Keys to move the
cursor left and right on the display. Move the
cursor to the letter to be changed.