8
3 B: Entering the Enrollment Mode
Chapter 3: Adding Components
Enter the Installer’s Programming Mode by entering [
∗
][8][Installer’s Code]
(refer to Chapter 5A, How to Enter the Installer's Programming Mode.)
Press the
-Yes Key when this message
is displayed.
When this message is displayed, press the
-YES Key.
The Enrollment Message indicates how
many of each component are enrolled on
the system:
• “0U” represents the number of Universal Transmitters
• “0M” represents the number of Motion Detectors
• “0S” represents the number of Smoke Detectors
• “0A” represents the number of Sounders
• “1K” represents the number of Keypads
In this example, only 1 Keypad has been enrolled on the system. As each
component is enrolled on the system or removed from the system, the number
beside the letter representing those components will be updated.