11
3 E: Enrolling the Second Keypad
Chapter 3: Adding Components
Enter the Serial Number of the Second
Keypad on the
First Keypad.
Press the
-YES Key. The Sounders will
sound two short beeps and this message
will be displayed.
Install the batteries in the Second Keypad. Refer to the label on the back of
the Keypad to ensure that the batteries are installed correctly.
On the
Second
Keypad, press the [#] Key;
this message will be displayed.
On the
Second
Keypad, press the [#] Key
again; this message will be displayed.
The Controller Serial Number is printed on
the back of the Controller. Enter the Controller
Serial Number on the
Second Keypad.
On the Second Keypad, press the
-YES Key. When the Keypad is
successfully enrolled, it will return to its inactive state and the Sounders will
sound two short beeps.
Secure the Second Keypad to its backplate (the Sounders will not sound
beeps when this is done). As the Keypad is enrolled, the Enrollment Screen
will be updated to indicate how many Keypads are installed on the system.
No more then 2 keypads can be enrolled on any one system.