DRUCK & TEMPERATUR Leitenberger LR-Cal LPC 300, Operating Manual, Page: 91 / 116

DRUCK TEMPERATUR & Leitenberger GmbH • Bahnhofstr. 33 • D-72138 Kirchentellinsfurt •
Tel. +49 (0) 7121-90920-0 • Fax +49 (0) 7121-90920-99 • -Info@Leitenberger.de • • www.druck-temperatur.de
GERMANY
DT www. -Cal.net LR
MANUAL
LPC 300 Druckkalibrator
300 Pressure Calibrator LPC
91
7.2.4 Contents of the menus SETUP
a) : MEASURING Operang mode MEASURING
• To measure working/process pressures
• For comparave measurements and/or calibraons (without data recording) of
mechanical *) and electrical pressure measuring instruments (supply and display of the test
item through the
). 300 LPC LR-
Cal
For further informaon see chapter 7.3.1 „ mode“ and 7.3.2 „ MEASURING MEASURING
mode (with test item)“.
b) : CALIBRATION Operang mode CALIBRATION
• For on-site calibraon of mechanical *) and electrical pressure measuring instruments
(without ). In this case the data sets (for up to 16 test items, each with up to 32 test points PC
including date and me) are recorded within the . 300 LPC LR-
Cal
For further informaon see chapter 7.3.3 „ mode“. CALIBRATION
*) For mechanical indicang instruments, the test item‘s measured value(s) must be entered
via the numeric keypad (each to be confirmed with key). ENTER
The calibraon data can be transferred into printable cerficates using the oponal
soware PC LPC- .
Cal
c) - : Operang mode - SWITCH TEST SWITCH TEST
• For the easy checking of pressure switches, including automac calculaon of the switch
hysteresis.
For further informaon see chapter 7.3.7 „ - mode“. SWITCH TEST
d) Funcons: Operang funcons such as
• Tare: Offset correcon of the reference pressure value
• Min/Max: Minimum/maximum memory
• Alarm: Min/Max alarm (visual and audible)
.Configuration
Calibration
Switch-Test
Functions
-Info
ReferenceSensor
Ref. Sensor-list
-Configuration
Schnittstelle
CalData
switch off
LPC
LPC
CLEAR
LPC
Measuring
a)
b)
c)
d)
e)
f)
g)
h)
i)
j)
k)