DRUCK
TEMPERATUR
&
Leitenberger GmbH •
Bahnhofstr. 33 • D-72138 Kirchentellinsfurt •
Tel. +49 (0) 7121-90920-0 • Fax +49 (0) 7121-90920-99 •
• www.druck-temperatur.de
GERMANY
DT
www.
-Cal.net
LR
MANUAL
LPC 300 Druckkalibrator
300 Pressure Calibrator
LPC
103
7.3. Modus
6
mode (calibraon of a dial pressure gauge)
CALIBRATION
BACK
Deviaon
Deviaon
Deviaon
No. of test item
and No. of test
point
No. of test item
and No. of test
point
No. of test item
and No. of test
point
Generate the speciied
setpoint in acc.
with the
test item display
using the
pressure generator
If the set value = 0 bar make
sure the calibraon assembly
is in a pressure-free condi-
on/vented to atmosphere
(test item must indicate 0 bar;
zero correcon if necessary)
and with
<--
record the values of this test
point
Generate the speci ied
f
setpoint in acc.
with the
test item display
using the
pressure generator
Enter the measured values
of this test point
(with
back to previous
2. Test point
x. Test point
1. Test point
(e.g. 0 bar)
2. Test point
(e.g. 1 bar)
test point)