DRUCK
TEMPERATUR
&
Leitenberger GmbH •
Bahnhofstr. 33 • D-72138 Kirchentellinsfurt •
Tel. +49 (0) 7121-90920-0 • Fax +49 (0) 7121-90920-99 •
• www.druck-temperatur.de
GERMANY
DT
www.
-Cal.net
LR
MANUAL
LPC 300 Druckkalibrator
300 Pressure Calibrator
LPC
87
Following the status message, the display returns to the screen for the last selected operang
mode (see following chapter 7.2.3 „Display contents of the operang modes“).
7.2.2 Switching off the
300 process calibrator
LPC
LR-
Cal
The calibrator is switched off using the „
switch off“ menu item in the first submenu. For this,
press the
key, select the „
switch off“ menu item and confirm using the
bu on.
LPC
SETUP
LPC
SELECT
7.2.3 Display contents of the operang modes
Operang mode: MEASURING
When a
with a
reference pressure sensor connected to it is first switched
on, the calibrator (aer desplaying a brief status message) switches to
mode (see
following picture.)
300
-S
LPC
LPC
MEASURING
LR-
Cal
Display:
with reference pressure sensor only (without test item):
MEASURING
a) Measuring range of the
LPC-S
reference pressure sensor (which
is currently connected
b) Current measured value of the
pressure reference sensor
LPC-S
c) Pressure unit (se able via menu)
.Configuration
Calibration
Switch-Test
Functions
-Info
ReferenceSensor
Ref. Sensor-list
-Configuration
Interface
CalData
switch off
LPC
LPC
CLEAR
LPC
Measuring
Switch off +
b)
a)
c)