22
GTS HUMIDIFIER LX SERIES INSTALLATION, OPERATION, AND MAINTENANCE MANUAL
• The following information is not intended to supersede any requirements of
federal, state, or governing codes having jurisdiction; prior to locating the
unit, authorities having jurisdiction should be consulted.
• The GTS must be level and located so there is enough clearance for
opening the access panels (see recommended clearances on Page 15).
• Do not locate unit in areas where the surrounding air has high levels of
particulates, such as some industrial parks or areas near highways. In
situations such as these, you will need to filter the air inlets.
• The unit should be located so prevailing winds do not blow into the air
intakes.
• When located on the roof, the air intakes must be a minimum of 14”
(360mm) off the roof to prevent intake of snow or splashed rain.
• Locate unit so air intakes are not too close to other exhaust fan outlets,
gasoline storage, or other contaminants that could potentially cause
dangerous situations. Using and storing gasoline or other flammable vapors
and liquids in open containers near this appliance is hazardous.
INSTALLATION
Outdoor enclosure: Location
B
FIGURE 22-1: OUTDOOR ENCLOSURE MOUNTED ON A CURB
B
FIGURE 22-2: OUTDOOR ENCLOSURE MOUNTED FLUSH
OM-8008
OM-8009
C
A
A
K
L
