DRESSTA 32501, Operator'S Manual

Page: 92 / 177

SECTION 5
MAINTENANCE
Page 4
TD-15H DRESSTA
5.2. SCHEDULED MAINTENANCE GUIDE
Every 10 Hours of Operation (Every Day)
1. Check radiator coolant level. Refer to 5.8.5
2. Drain water from fuel filter prior to starting work. Refer to 5.12.4.
3. Check engine oil level. Refer to 5.11.1.
4. Check hydraulic system oil level. Refer to 5.13.1.
5. Check and clean pre-cleaner screen dome, if necessary. Refer to 5.6.4.1.
6. Check fluid level in window washer reservoir. Refer to 5.21.
7. Carry out ground level inspection. Refer to 5.2.1.
8. Clean windows, lights and instrument panel.
9. Visually check condition of drive belts (Refer to 5.7.)
10. Visually check condition of fan (Refer to 5.9.)
11. Check instruments and warning lights for operation. Refer to 4.3.
12. Refill fuel tank at the end of each day’s operation. Refer to 5.12.1.
12.* Check torque:
– track shoe bolts. Refer to 5.19.2.
– blade cutting edge and end bit bolts. Refer to 5.15.3.
– trunnion cap bolts and trunnion mounting bolts. Refer to 5.15.2.
* – after initial 10 hours of operation only.
Every 50 Hours of Operation
1. Check oil level in rear mainframe. Refer to 5.18.2.
2. Clean radiator core. Refer to 5.8.6.
3. Check and adjust track tension, if necessary. Refer to 5.19.4. and 5.19.5.
4. Lubricate ripper cylinder bearings and pins. Refer to 5.14.
5*. Replace hydraulic system return filter. Refer to 5.13.3.
6*. Replace transmission system pressure filter. Refer to 5.18.4.1.
7*. Clean transmission system suction strainer. Refer to 5.18.4.2.
* – after initial 50 hours of operation only.
Every 250 Hours of Operation or 3 Months
1. Change engine crankcase oil filter. Refer to 5.11.2.
2. Change engine crankcase oil. Refer to 5.11.2.
3. Check air intake system for leaks (hoses and clamps). Refer to 5.6.4.2.
4. Check air conditioner belt tension (if equipped). Refer to 5.7.2.2.
Every 500 Hours of Operation or 6 Months
1. Check coolant for DCA concentration and replace coolant filter. Refer to 5.8.3.
2. Check oil level in pivot shaft housing. Refer to 5.19.7.
3. Check final drive oil level. Refer to 5.17.1.
4. Replace fuel filters. Refer to 5.12.4.2.
Every 1000 Hours of Operation or 12 Months
1. Replace rear mainframe breather. Refer to 5.18.5.
2. Change final drive oil. Refer to 5.17.2.
3. Change oil level in rear mainframe. Refer to 5.18.3.
4. Replace transmission system pressure filter. Refer to 5.18.4.1.
5. Lubricate transmission universal joints. Refer to 5.18.1.
https://www.truck-manuals.net/