SECTION 5
MAINTENANCE
Page 10
TD-15H
DRESSTA
MAINTENANCE AND SERVICE CHART
EO1:
Engine Oil per HMS B21-0002 or multi-grade diesel engine oil CF-4/SG per API, MIL–L–2104D
with sulfated ash of 1.85% maximum.
*EO2:
Multi – purpose engine oil per HMS B21-0003 or engine oil CD per API MIL-L-2104C passing TO-2
and C-3 test with 0.10% minimum zinc.
EO:
Arctic selection: multi-purpose oil per HMS B21-0001or MIL-L-46167
MPL:
Multi – purpose gear lubricant per HMS B22-0003 or API GL-5, MIL-L-2105C
Arctic selection: grade 75 per HMS B22-0003
MPG:
Multi – purpose grease 251 HEPM per HMS B27-0002 or NLGI grade #2 multi-purpose lithium
grease with 3% minimum molybdenum disulfide (MoS
2
).
Arctic selection: per HMS B27-0003 or MIL-L-10924D
ANTI-FREEZE:
Single Phase, ethylene glycol base per HMS B01-0001.
DIESEL FUEL:
Per HMS B32-0001 or ASTM D-975
Arctic selection: per VV-F-800DF-A
5.4. LUBRICATION
5.4.1. WHEN SHIPPED
This machine has been lubricated at the factory for operation in an air temperature range
of +21[
°
C] to – 23[°C]. If this tractor is to be operated above or below this range, change to the
correct lubricants.
Unless an exception is shown below, all lubricants can be used (within above temperature range)
until regular scheduled (normal) change intervals occur. Refer to "MAINTENANCE AND SERVICE
CHART" for the scheduled (normal) change intervals and to "REFILL SPECIFICATIONS AND
CAPACITIES CHART" for the proper oil grades for ambient temperatures.
Front idlers, track idlers and track rollers are permanently lubricated with a SAE 30, API CD or
MIL-L-2104C engine oil. A level check of these compartments is not required.
Lubricated track chain links are permanently lubricated with SAE 85 W multi-purpose lubricant.
5.4.2. WHEN SERVICED
WARNING! When you service the machine, always follow the Operator's or
Service Manual. Never grease, oil or perform any maintenance alone with the
engine running. Always have another experienced person helping in the
operator's compartment when maintenance must be done with the engine
running. Block up all attachments securely. Do not leave the operator's seat with
the engine running. Failure to follow these instructions could result in serious
injury or death.
https://www.truck-manuals.net/
Summary of Contents for 32501
