DRESSTA 32501, Operator'S Manual

Page: 72 / 177

SECTION 4
OPERATING
Page 26
TD-15H DRESSTA
OPERATING MOUNTED EQUIPMENT
Fig. 4.23. Blade Control Lever Positions (1)
1. Blade Control Lever
2. Ripper Control Lever
3. Horn Button I. Raise
II. Hold
III. Lower IV. Float
V . LH Tilt
VI. RH Tilt
4.17.1. HOLD
When the lever is released from any position except “Float”, the lever automatically returns to the
hold position. The blade height will remain the same, as it was when the lever was released.
4.17.2. RAISE
Pull the control lever back to raise the blade to desired height. When released the lever will return
to the hold position.
4.17.3. LOWER
Push the control lever forward to lower the blade. When released the lever will return to the hold
position.
4.17.4. FLOAT
With the control lever in the float position, the blade is free to follow the contour of the ground. To
place the control lever in the float position, push all the way forward to its detented position in
direction IV in Fig. 4.23. The lever will remain in this position until it is manually returned to the
hold position.
https://www.truck-manuals.net/