DRESSTA 32501, Operator'S Manual

Page: 162 / 177

SPECIFICATIONS
SECTION 6
Page 9
TD-15H DRESSTA
SPECIAL TORQUES
No Description of tightening place
Size of
thread
Torque
[Nm]
No of
places
12 Magnetic Switch Terminal 10-32 2 2
13 Cranking Motor Solenoid Switch Terminal 10-32 2.6 1
14 Torque Converter Temperature Sensor Terminal 10-32 2 1
15 Circuit Breaker Terminal (On Instrument Panel) 10-32 2 10
16 Fuel Sensor Mounting Screw 10-32 2 5
17 Fuel Level Gauge Terminal 10-32 2 3
18 Fuel Level Gauge Mounting Screw 10-32 0.9-1.4 2
19 Washer Reservoir Spout Mounting Screw M5 7 2
20 Cab Plastic Trim Mounting Screw M6 5.4 76
21 Circuit Breaker Terminal (On Hood Support) ¼ ["]-28 6.2 2
22 Magnetic Switch Terminal 5/16 ["] -18 5.4-8.1 2
23 Cab Lining Trim Mounting Screw M8 13.5 6
24 Battery Hold Down Bolt 3/8 ["] 9 2
25 Battery Terminal Nut 3/8 ["] 31 4
26 Master Switch Terminal 3/8 ["] -24 12 2
27 A/C Compressor Mounting Bolt 3/8-16 62 2
28 Air Pre-Cleaner Clamp Bolt 3/8 42 2
29 Alternator to Battery (+) Terminal 7/16 ["] 8.5 1
30 Track Roller Bushing Retainer Bolt 7/16 ["] 87 All
31 Cranking Motor Terminals ½ ["] 31 2
32 Hydraulic Reservoir Oil Filter Mounting Nut ½ ["] 14-27 1
33 Sprocket Dirt Deflector Mounting Bolt ½ ["] 110 8
34 Equalizer Bar Pivot Retainer Plate Bolt 5/8 ["] 267 8
35 Equalizer Bar Rebound Bracket Mounting Bolt 5/8 ["] 267 8
36 U-joint Cover Bolt 5/8 ["] 267 8
37 Track Adjuster Check Valve 5/8 ["] 68 2
38 Track Adjuster Relief Valve 5/8 ["] 68 2
39 Diagonal Strut Prevailing Torque Clamping Nut 5/8 ["] 267 4
40 Diagonal Strut Prevailing Torque Clamping Bolt 5/8 ["] 267 4
41 Cylinder Yoke Cap Bolt 5/8 ["] 250 8
42 Starting Switch Nut 5/8 ["] -24 4.5 1
43 Horn Switch Nut 5/8 ["] -24 4.5 1
44 End Bit Nuts (Semi-U Blade with C-Frame and LGP) ¾ ["] 455 12
45 Cutting Edge Nuts (C-Frame and LGP) ¾ ["] 455 21
46 Cutting Edge (Semi-U Blade) ¾ ["] 455 17
https://www.truck-manuals.net/