DRESSTA 32501, Operator'S Manual

Page: 138 / 177

SECTION 5
MAINTENANCE
Page 50
TD-15H DRESSTA
FINAL DRIVES
Fig. 5.43. Checking the Lubricant Level
1. Filler and Level Plug 2. Drain Plug
5.17.2. CHANGING THE OIL
1. While the oil is at operating or warm ambient temperature, park the machine on level ground.
Remove drain plugs (2) and levels plugs (1) and allow the lubricant to drain into a suitable
container. Remove metal particles from the magnetic plugs. Install and tighten the drain plugs.
Fill app.8 liters of fuel oil up to the housing and install the plugs.
2. Operate the machine in low gear (with no load) for a few minutes. Remove the drain plugs and
thoroughly drain the fuel oil into a suitable container. Reinstall and tighten the drain plugs.
Remove the filler and level plugs. Fill the housing with fresh oil up to the bottom of the filler and
level plug opening. Refer to the "REFILL SPECIFICATIONS AND CAPACITIES" chart, 5.3.1
for grade of lubricant specified. Reinstall and tighten the filler and level plugs.
5.18. TRANSMISSION SYSTEM
5.18.1. UNIVERSAL JOINTS
Every 500 hours lubricate the universal joints of transmission system.
General
The rear frame is the common oil reservoir for the transmission, torque converter and hydraulic
steering drive. The system has a pressure filter and a suction strainer, which require service.
https://www.truck-manuals.net/