DRESSTA 32501, Operator'S Manual

Page: 57 / 177

OPERATING
SECTION 4
Page 11
DRESSTA TD-15H
CONTROLS AND ADJUSTMENT
The operator’s seat is adjusted as follows:
Press tilt lever (5) to adjust the required angle of the back cushion.
Turn knob (1) to adjust to your own weight. Move lever (2) forward to slide the seat back or forth.
Turn knob (4) located on the left side of the back rest to adjust the back rest angle.
For ripping operations lift lever (3) to swivel the seat 15[°] to the right.
Fig. 4.4A. GRAMMER Seat (if equipped)
1. Weight Adjustment Lever
2. Seat Height Adjustment Lever
3. Back Rest Angle Adjustment Lever
4. Back Rest Profile Adjustment Lever
5. Seat Travel Lever
This is a suspension seat with several adjustments to provide maximal comfort to the operator.
Set with lever (1) the initial load according to the operator's weight.
The seat cushion can be set in one of the following three positions: "low", "medium" and "high". To
change the position press the cushion down or lift it up as necessary.
Turn knob (4) to adjust the backrest profile.
Pull up lever (5) and slide the seat forward or rearward to the desired positions and lock with the
lever.
The backrest angle can be adjusted with lever (3).
The seat is equipped with arm rests and safety belt.
The seat belt is emergency type and does not need to be adjusted.
4.5.2. SEAT BELT
WARNING! Before driving a machine adjust the seat belt and fasten the seat belt.
Adjust the belt to fit snugly and low around the hips to lessen the chance and
severity of injury in the event of an accident. Never wear the belt across the
abdomen.
https://www.truck-manuals.net/