DRESSTA 32501, Operator'S Manual

Page: 39 / 177

MACHINE TRANSPORT AND STORAGE
SECTION 3
Page 5
DRESSTA TD-15H
LIFTING MACHINE ON SLINGS
Fig. 3.1B. Plate Marking Place for Lifting Machine
4. Attach beams to the lifting slings to prevent them sliding out of the sling.
5. The standard machine weight with a cab, ROPS structure, air conditioner, blade and ripper
is 19,850 [kg].
3.3. MOVING A DISABLED MACHINE
CAUTION! When using a chain or cable, be sure it is strong enough for the
expected load and is properly secured to the drawbar pins or tow hooks
(if equipped).
WARNING! When pulling with a chain or cable, take up the slack slowly to avoid
jerking. A chain or cable which fails under load can whip and cause serious
injury. Stand clear. Do not pull or tow unless the operator's compartment is
guarded against or out of reach of a whipping chain or cable. Attach only to the
machine tow hook or drawbar. Failure to follow these instructions could cause
serious injury.
IMPORTANT! A machine MUST NOT be towed if the steering drive, final drive or their parts or
subassemblies are out of order. It must be transported to avoid further damage.
To avoid a possibility of power train damage, limit towing to a distance of 1 [km] at speeds less
than 2 [km/h]. The brakes on this machine are spring applied automatically when the engine is
stopped or the steering hydraulic system fails, and can only be released hydraulically.
The diagnostic center (Fig. 3.2) has a quick couplers
R
B
and
L
B
for externally applying hydraulic
pressure to the LH and RH brake spools to release them prior to towing per below specified
procedure.
https://www.truck-manuals.net/