DRESSTA 32501, Operator'S Manual

Page: 163 / 177

SECTION 6
SPECIFICATIONS
Page 10
DRESSTA TD-15H
SPECIAL TORQUES
No Description of tightening place
Size of
thread
Torque
[Nm]
No of
places
47 Diagonal Strut Cap Nut ¾ ["] 455 8
48 Lift Cylinder Cover Nut ¾ ["] 455 8
49 Track Roller Mounting Bolt ¾ ["] 455 All
50 Track Roller Shield and Rock Deflector Bushing Mounting Bolt ¾ ["] 455 All
51 Track Roller Shield and Rock Deflector Mounting Bolt ¾ ["] 455 All
52 Rear Track Idler Mounting Block Bolts ¾ ["] 455 8
53 Front Track Idler Mounting Block Bolt ¾ ["] 455 8
54 Front Idler Fork Mounting Bolt ¾ ["] 455 8
55 Track Shoe Bolt ¾ ["] 700 All
56 Sprocket Rock Shield Mounting Bolts ¾ ["] 455 8
57 Pivot Shaft Filler Plug ¾ ["] 20 – 54 2
58 Master Switch Mounting Nut ¾ ["] 51 1
59 Front Idler Shaft Support Bolt 7/8 ["] 730 4
60 Push Arm Trunnion Bolt 7/8 ["] 610 20
61 Rear Frame Drain Plug 7/8 ["] 48 – 62 3
62 Track Frame Guide Plate Mounting Bolt 7/8 ["] 730 12
63 FOPS/ROPS Mounting Bolt 1 ["] 1110 8
64 ROPS Support Mounting Bolt 1 ["] 1110 8
65 Track Frame Lower Guide Retainer Bolt 1 ["] 1110 4
66 Pusharm Trunnion Cap Bolt 1 ["] 1050 4
67 C-Frame Trunnion Cap Bolt 1 ["] 1050 4
68 Gimbal Crosstube Mounting Bolt 1 ["] 920 4
69 Track Frame Guide Retainer Bolt 1 ["] 1110 4
70 Push Arm Trunnion Bolt (LGP) 1 ["] 920 16
71 Ripper Mounting Frame Bolts 1-1/8 ["] 1300 16
72 Rigid Drawbar Mounting Bolt 1-1/8 ["] 1560 6
6.5. TORQUES VALVES FOR STANDARD METRIC FASTENERS
This chart provides tightening torque for general-purpose applications using original equipment
standard hardware. Original equipment standard hardware is defined as coarse thread metric
class 10.9 bolts and class 10.0 nuts and thru hardened flat washers (Rockwell "C" 38-45), all
phosphate coated and assembled without supplemental lubrication (as received condition). The
torques shown below apply to phosphate coated bolts designed for 60% yield strength.
The torques shown below also apply to phosphate coated bolts used with phosphate coated
prevailing torque nuts, phosphate coated bolts used with copper plated weld nuts and are applied
to steel and cast iron parts.
https://www.truck-manuals.net/