Drayton Wiser, User Manual

Page: 13 / 57

13/57
Set up a system
Join devices to the Heat Hub
R
Do you have an OpenTherm
®
boiler?
You must first adapt or rewire the OpenTherm
installation to the Heat Hub
R
for Wiser to detect
the OpenTherm connection.
For further information and help for installation,
have a look here: How to connect Open Therm
-> page 47
Gas, oil or electric?
To control your room temperature properly, it is
necessary to know if the heating system is gas,
oil or electric. If you are uncertain, keep the
default settings. You can change this parameter
later in Settings .
Select a channel of a three-
channel Heat Hub
R
If you are using a
Heat Hub
R
Three Channel
,
you must assign the room thermostats to the
appropriate channels. Channel one and three
are used for the heating circuits. Channel two is
used for the hot water circuit.
To ensure the system works correctly, you must
know which rooms are on which heating circuit.
Ask your installer if you are unsure of this
information.