Drayton Wiser User Manual Download Page 11

Page: 11 / 57

11/57

Add a Radiator Thermostat

The radiator thermostat must be joined to the

Heat Hub

as follows:

Insert the batteries and join the network

Insert the batteries in the radiator

thermostat.

Ensure the polarity of the batteries (+ and

- ends) is correctly oriented. The polarity is

indicated on the device’s terminals.

The device is ready for joining when:

• left/right LEDs flash red/blue

• central LED shows a solid orange

Twist and hold the cap in the

direction

until the central LED flashes green.

Install the Radiator Thermostat

The radiator thermostat comes with two valve

adapters:
• Valves with a M30x1.5 threaded connection
• Danfoss RA valves

Install the radiator thermostat on the

radiator using a valve adapter.

Twist the cap in the

–

direction and hold for

2 seconds until the blue LED lights up.

Note:

The radiator thermostat now calibrates

the radiator valve. If you forget this step, the

radiator thermostat will automatically calibrate

the radiator valve after 5 minutes. Calibration

takes only a few seconds.

Valve adapter

The two included valve adapters work with

the vast majority of radiator valves.
If however, neither work with your radiator

valves, consult the

Valve Adapter Guide

the Drayton website. After reviewing this

guide, if you still need assistance please

contact Customer Services at the number

indicated on the last page of this guide.

Installation guide

To ensure correct and safe installation,

always refer to the installation guide.

Join devices to the Heat Hub

No network found? The Heat Hub

has

timed out

If the Heat Hub

Set-up Mode has timed

out (the Setup LED shows a solid green),

repeat the set-up step.

No network found? The Heat Hub

still in Set-up Mode

If the Heat Hub

is still in Set-up Mode

(the Setup LED is flashing green), then

the radiator thermostat is too far away

from the Heat Hub

. In this case, install

a smart plug as an RF signal range

extender. Have a look at:

Getting to

know the smart plug -> page 41

For

other options, contact Drayton Customer

Service.

Summary of Contents for Wiser


























































Search results

Summary of Contents for Wiser

Reviews:

Related manuals for Wiser

Brands by name

Popular brands

Drayton Wiser, User Manual

Search results

Summary of Contents for Wiser

Reviews:

Related manuals for Wiser

Brands by name

Popular brands