Drayton Wiser, User Manual

Page: 48 / 57

48/57
More on Installation
Moving the Room Thermostat
Move the Room Thermostat to another room
If your system only has a single room thermostat, it can be moved
around the house.
If your system has two room thermostats controlling one heating circuit
respectively (e.g. one circuit downstairs and one upstairs), ensure
each room thermostat stays in a room within the circuit to which it
was originally assigned. This avoids conflicts between the two room
thermostats. Each room thermostat can only call for heat from the
heating circuit it has been originally assigned.
If your system has a combination of room thermostats and radiator
thermostats, then each room has its own schedule which is
independent of other rooms. Placing your room thermostat in rooms
other than those originally assigned to will cause conflicts as each
heating device follows its own schedule.
How to change the Wi-Fi network
If you need to change the Wi-Fi network follow the steps below:
Launch the
Wiser Heat app
.
If you are logged in, make sure to log off first. After logging off, tap the
back button on the login screen of the
Wiser Heat app
to go to the
start screen.
Tap
Set-up
/
Create Accoun
t (even though your system has
already been set up).
Select your Heat Hub
R
type.
Press the Set-up button on the Heat Hub
R
Setup
Hot Water
Heating
Follow the on-screen instructions to connect your mobile device to
the Heat Hub
R
.
Tap
Skip
when prompted to set-up your heating system.
Follow the on-screen instructions to connect your Heat Hub
R
to the
Internet by selecting the correct Wi-Fi network.
Tap
Skip when prompted to register an account.
This creates a new Wi-Fi network and you will see the home screen
and can proceed to control your heating as normal.