Drayton Wiser, User Manual

Page: 3 / 57

3/57
Three key steps to success
Wiser system
Three steps are required to allow you to set-up and control your heating
system from wherever you are.
The Wiser Heat Hub
R
(Heat Hub
R
) should be installed by a qualified
electrician or heating engineer before these steps are performed. Have on
hand your heating devices (room thermostats and radiator thermostats) and
your smart plugs.
Connect your mobile device to the Heat Hub
R
Download the Wiser Heat app onto your mobile device. Run it and follow its
step-by-step directions to connect your mobile device to the Heat Hub
R
. Have
a look at Connect your mobile device -> page 8 .
Join devices to the Heat
Hub
R
With your mobile device connected to the Heat Hub
R
, add heating devices to
the heating system and define the rooms in which they are or will be located.
If you are a professional installer, upon completing this step, you can hand
over the system to your customer for the last step, connection to the Internet.
Have a look at Join devices to the Heat Hub -> page 9.
Connect it all to the Internet
Once all the heating devices have been joined to the heating system and
their location identified, you will be prompted to leave Join Mode and create
and register an account. This will allow you to control your heating and hot
water from anywhere in the world through the cloud. Have a look at Connect
it all to the internet -> page 14.
Note that with the account registration, you will be prompted for your email
and residential address. The residential address is required for features such
as Eco Mode to work correctly.