Draytek VigorIPPBX 2820 Series, User Manual

Page: 332 / 379

VigorIPPBX 2820 Series User’s Guide 322
Long Preamble This option is to define the length of the sync field in an
802.11 packet. Most modern wireless network uses short
preamble with 56 bit sync filed instead of long preamble
with 128 bit sync field. However, some original 11b
wireless network devices only support long preamble.
Check it to use
Long Preamble if needed to communicate
with this kind of devices.
Packet-OVERDRIVE This feature can enhance the performance in data
transmission about 40% for 11g (5% for 11n) by checking
Tx Burst . It is active only when both sides of Access
Point and Station (in wireless client) invoke this function
at the same time. That is, the wireless client must support
this feature and invoke the function, too.
Note: Vigor N61 wireless adapter supports this function.
Therefore, you can use and install it into your PC for
matching with Packet-OVERDRIVE (refer to the
following picture of Vigor N61 wireless utility window,
choose
Enable for TxBURST on the tab of Option ).
Rate Control It controls the data transmission rate through wireless
connection.
Upload – Check Enable and type the transmitting rate for
data upload. Default value is 30,000 kbps.