manualshive.com logo in svg

Draytek VIGOR3220 SERIES, User Manual

Share
Download
Draytek VIGOR3220 SERIES User Manual Download Page 304

 

Vigor3220 Series User’s Guide   

292 

 

Available settings are explained as follows: 

Item Description 

Check to enable the Filter 
Rule 

Check this box to enable the filter rule. 

Comments 

Enter filter set comments/description. Maximum length is 14- 

character long. 

Index(1-15) 

Set PCs on LAN to work at certain time interval only. You 
may choose up to 4 schedules out of the 15 schedules 

pre-defined in Applications >> Schedule setup. The default 
setting of this field is blank and the function will always 
work. 

Clear sessions when 

schedule ON 

Check this box to clear the sessions when the above schedule 

profiles are applied. 

Direction 

Set the direction of packet flow. It is for Data Filter only. For 
the Call Filter, this setting is not available since Call Filter is 

only applied to outgoing traffic. 

 

Note: RT means routing domain for 2nd subnet or other LAN. 

Source/Destination IP 

Click Edit to access into the following dialog to choose the 

source/destination IP or IP ranges. 

Summary of Contents for VIGOR3220 SERIES







































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands