manualshive.com logo in svg

Draytek VIGOR3220 SERIES, User Manual

Share
Download
Draytek VIGOR3220 SERIES User Manual Download Page 209

 

Vigor3220 Series User’s Guide 

III-197

Item Description 

Mode 

There are several modes provided for you to choose. 

 

 

Info 

 

You should also set RADIUS Server 
simultaneously if 802.1x mode is selected. 

Disable - Turn off the encryption mechanism. 
WEP-Accepts only WEP clients and the encryption key should 

be entered in WEP Key. 
WEP/802.1x Only - Accepts only WEP clients and the 

encryption key is obtained dynamically from RADIUS server 
with 802.1X protocol. 
WPA/802.1x Only- Accepts only WPA clients and the 
encryption key is obtained dynamically from RADIUS server 

with 802.1X protocol. 
WPA2/802.1x Only- Accepts only WPA2 clients and the 

encryption key is obtained dynamically from RADIUS server 
with 802.1X protocol. 
Mixed (WPA+WPA2/802.1x only) - Accepts WPA and WPA2 
clients simultaneously and the encryption key is obtained 

dynamically from RADIUS server with 802.1X protocol. 
WPA/PSK-Accepts only WPA clients and the encryption key 
should be entered in PSK. 

WPA2/PSK-Accepts only WPA2 clients and the encryption key 
should be entered in PSK. 

Mixed (WPA+ WPA2)/PSK - Accepts WPA and WPA2 clients 
simultaneously and the encryption key should be entered in 

PSK. 

WPA 

The WPA encrypts each frame transmitted from the radio 

using the key, which either PSK (Pre-Shared Key) entered 
manually in this field below or automatically negotiated via 

802.1x authentication. Either 8~63 ASCII characters, such as 
012345678(or 64 Hexadecimal digits leading by 0x, such as 

"0x321253abcde..."). 
Pre-Shared Key (PSK) - Either 8~63 ASCII characters, such as 

012345678..(or 64 Hexadecimal digits leading by 0x, such as 
"0x321253abcde..."). 

WEP 

64-Bit -

 

For 64 bits WEP key, either 5 ASCII characters, such 

as 12345 (or 10 hexadecimal digitals leading by 0x, such as 
0x4142434445.) 
128-Bit - For 128 bits WEP key, either 13 ASCII characters, 

such as ABCDEFGHIJKLM (or 26 hexadecimal digits leading by 
0x, such as 0x4142434445464748494A4B4C4D). 

 

All wireless devices must support the same WEP encryption 

bit size and have the same key. Four keys can be entered 
here, but only one key can be selected at a time. The keys 

can be entered in ASCII or Hexadecimal. Check the key you 
wish to use. 

After finishing all the settings here, please click OK to save the configuration. 

Summary of Contents for VIGOR3220 SERIES







































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands