Draytek VIGOR3220 SERIES User Manual Download Page 158

Page: 158 / 742

Vigor3220 Series User’s Guide

146

Available settings are explained as follows:

Item Description

Name

Type a name for such profile. The length of the user name is
limited to 19 characters.

Common Name Identifier Type or edit the common name identifier for the LDAP server.

The common name identifier for most LDAP server is “cn”.

Additional Filter

Type the condition for additional filter.

Base Distinguished Name

/ Group Distinguished
Name

Type or edit the distinguished name used to look up entries on

the LDAP server.

Sometimes, you may forget the Distinguished Name since it’s
too long. Then you may click the

button to list all the

account information on the AD/LDAP Server to assist you finish

the setup.

After finished the above settings, click OK to save and exit this page. A new profile has been
created.

For detailed information about LDAP application, refer to section 4.6 How to Implement the
AD/LDAP Authentication for User Management?

Summary of Contents for VIGOR3220 SERIES







































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for VIGOR3220 SERIES

Reviews:

Brands by name

Popular brands

Draytek VIGOR3220 SERIES, User Manual

Search results

Summary of Contents for VIGOR3220 SERIES

Reviews:

Brands by name

Popular brands