manualshive.com logo in svg

Draytek Vigor2132 Series, User Manual

Share
Download
Draytek Vigor2132 Series User Manual Download Page 192

 

Vigor2132 Series User’s Guide

 

184

web page. 

Enable 

Check this box to enable this policy. 

Protocol 

Display the protocol used for this policy. 

Interface 

Display the interface to send packets to once the policy is 
matched. 

Interface Address 

Display the IP address of the selected interface.   

Src IP Start 

Display the IP address for the start of the source IP. 

Src IP End 

Display the IP address for the end of the source IP. 

Dest IP Start 

Display the IP address for the start of the destination IP. 

Dest IP End 

Display the IP address for the end of the destination IP. 

Dest Port Start 

Display the IP address for the start of the destination port. 

Dest Port End 

Display the IP address for the end of the destination port. 

Move UP/Move Down 

Use 

Up

 or 

Down 

link to move the order of the policy. 

Wizard Mode 

Allow to configure frequently used settings of route policy 
via three setting pages 

Advance Mode 

Allow to configure detailed settings of route policy. 

To use Wizard Mode, simple do the following steps: 

1.

 

Click the 

Wizard Mode

 radio button.   

2.

 

Click any 

Index

 number link

 

(e.g., 2 in this case). The setting page will appear as follows: 

 

Available settings are explained as follows: 

Item Description 

Source IP 

Any

 – Any IP can be treated as the source IP. 

Src IP Start - 

Type the source IP start for the specified 

WAN interface. 

Src IP End - 

Type the source IP end for the specified 

WAN interface. If this field is blank, it means that all the 
source IPs inside the LAN will be passed through the WAN 

Summary of Contents for Vigor2132 Series
















































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands