Draytek Vigor2132 Series, User Manual

Page: 173 / 431

Vigor2132 Series User’s Guide 165
D D e e t t a a i i l l s s P P a a g g e e f f o o r r L L A A N N 2 2 ~ ~ L L A A N N 4 4
Available settings are explained as follows:
Item Description
Network Configuration Enable/Disable - Click Enable to enable such
configuration; click Disable to disable such configuration.
For NAT Usage - Click this radio button to invoke NAT
function.
For Routing Usage - Click this radio button to invoke this
function.
IP Address - Type in private IP address for connecting to a
local private network (Default: 192.168.1.1).
Subnet Mask - Type in an address code that determines the
size of the network. (Default: 255.255.255.0/ 24)
DHCP Server
Configuration DHCP stands for Dynamic Host Configuration Protocol.
The router by factory default acts a DHCP server for your
network so it automatically dispatch related IP settings to
any local user configured as a DHCP client. It is highly
recommended that you leave the router enabled as a DHCP
server if you do not have a DHCP server for your network.
Enable Server - Let the router assign IP address to every
host in the LAN.
Disable Server – Let you manually assign IP address to
every host in the LAN.
Enable Relay Agent - If you want to use another DHCP
server in the network other than the Vigor Router’s, you can
let Relay Agent help you to redirect the DHCP request to
the specified location.
DHCP Server IP Address – It is available when Enable
Relay Agent is checked. Set the IP address of the DHCP
server you are going to use so the Relay Agent can help to
forward the DHCP request to the DHCP server.