User Manual of CIC-D100 Ion Chromatograph
64
：
when the two channels are connected, the blue signal line is connected to
channel A and the green signal line is connected to channel B.
B.5.3 Steps for connecting SHA-15 automatic sampler to trigger line of the instrument
SHA-15 automatic sampler adopts full reverse control workstation which needs to be
connected to both the instrument and the computer when working. RS232 or USB serial port line
can be used when the automatic sampler is connected to the computer.
See the following figure for the connection between the automatic sampler and the
computer.
Figure B-3 SHA-15 Rear Panel
Figure B-4 SHA-15 reverse control connection diagram
Mode of connection between automatic sampler and the instrument:
1. Connect the start signal line to the automatic sampler START position. During
USB port
RS232 port
Trigger port
RS232 connection mode
RS232 cable
USB cable
USB connection mode
PC
se
ria
lp
or
t
PC
U
SB
in
te
rfa
ce
Caution
