User Manual of CIC-D100 Ion Chromatograph
36
Figure 3-25 Eluent area
When using the eluent generator, please refer to the following for settings.
a Setting button
This button sets the isocratic concentration value under the isocratic mode. The setting
value is the value in the left setting concentration input box. If it is under gradient mode, press
this setting button to cut into the gradient interface as shown in Figure 3-18 below. Upon
receiving the injection trigger signal, the program will run according to the preset gradient value
to set the concentration value of the eluent generator step by step. The gradient indicator will
change from red to green. After the gradient operation completed, the concentration value will
automatically return to the initial value. Triggered by another injection, the gradient operation
will start again. To turn off gradient operation, click the Start/Stop button
in the main
interface to switch back to the isocratic mode.
Figure 3-26 Monitoring information of eluent generator
Figure 3-27 Gradient curve of eluent generator
Caution: Press the
button to switch back to the main interface.
b Query button
This button is to query the setting value of eluent concentration. The query results are
displayed in the left input box for setting concentration.
