User Manual of CIC-D100 Ion Chromatograph
65
installation, push the buttons of the ports to both sides, with the green line connected to the
red end and the black line connected to the black end;
2. The other end is connected to the interface of the instrument’s automatic sampler;
3. After sampling by the automatic sampler, start the signal line to send the collection start
signal to the reverse control workstation.
Figure B-5 SHA-15 automatic sampler connection diagram
Please refer to the user manual of SHA-15 automatic sampler for details.
B.5.4 Steps for connecting AS-11 to trigger line of the instrument
1. Remove the trigger wire from the instrument accessory box;
2. Connect one end of the trigger line terminal to the leftmost Port 1 and Port 2 of the OUT
PUT port of the automatic sampler;
Connected to the
detector’s start
signal interface
Start signal
line
