manualshive.com logo in svg

Dräger Vapor 19.n, Instructions For Use Manual

Share
Download
Dräger Vapor 19.n Instructions For Use Manual Download Page 42

List of models/options for connection 

Vapor and the connections suitable for different Dräger
anaesthetic machines are described in brochure
"Options for connecting Dräger-Vapors" (SD 5327.20).

Plug-in adaptor, coded

Vapor 19.3 with plug-in adaptor

Plug-in adapter 
with anaesthetic-agent-specific coding
for Halothane

M 30 978

for Enflurane

M 30 979

for Isoflurane

M 30 980

for Sevoflurane

M 32 380

Coded plugs must not be interchanged.

Plug-in adaptor, uncoded

For Vapor 19.1 with M 25 140 plug-in adaptor without
milled corners.
For Vapor 19.3 with M 27 070 plug-in adaptor with milled
corners or 
M 25 140 plug-in adaptor without milled corners.

Plug-in a Interlock 2

Plug-in system with Interlock 2 for Vapor 19.3 only.

Vapor 19.1 can be modified to Interlock 2 by 
DrägerService.

Permanent conn 23 mm ISO cones

Vapor ISO connector connecting a Vapor 19.3 (or 19.1)
permanently.

(Basic model, permanent conn M 27 425)

Vapors must not be switched on in series.

Description
List of models/options for connection

42

0

Vol.    %

0

Vol.    %

دﯾﯾﺎﻣرﻓ ﮫﻌﺟارﻣ.WWW.ELM-FAN.IRتﯾﺎﺳ ﮫﺑ رﺗﺷﯾﺑ دراوﻣ دوﻠﻧاد یارﺑ

To download more items, go to ELM-FAN.IR

Summary of Contents for Vapor 19.n

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands