manualshive.com logo in svg

Dräger Vapor 19.n, Instructions For Use Manual

Share
Download
Dräger Vapor 19.n Instructions For Use Manual Download Page 3

For Your Safety and that of Your
Patients 

Strictly follow the Instructions for Use 

Any use of the apparatus requires full understanding and
strict observation of these instructions.
The apparatus is only to be used for purposes specified
here.

Maintenance

The apparatus must be inspected and serviced regularly
by trained service personnel at six monthly intervals 
(and a record kept). 
Repair and general overhaul of the apparatus may only be
carried out by trained service personnel.
We recommend that a service contract be obtained with
DrägerService and that all repairs also be carried out by
them.
Only authentic Dräger spare parts may be used for main-
tenance. 
Observe chapter "Maintenance Intervals".

Accessories 

Do not use accessory parts other than those in the order
list.

Liability for proper function or damage 

The liability for the proper function of the apparatus is
irrevocably transferred to the owner or operator to the
extent that the apparatus is serviced or repaired by
personnel not employed or authorized by DrägerService
or if the apparatus is used in a manner not conforming to
its intended use.
Dräger cannot be held responsible for damage caused
by non-compliance with the recommendations given
above.
The warranty and liability provisions of the terms of sale
and delivery of Dräger are likewise not modified by the
recommendations given above. 

Dräger Medizintechnik GmbH

3

For Your Safety and that of Your Patients

دﯾﯾﺎﻣرﻓ ﮫﻌﺟارﻣ.WWW.ELM-FAN.IRتﯾﺎﺳ ﮫﺑ رﺗﺷﯾﺑ دراوﻣ دوﻠﻧاد یارﺑ

To download more items, go to ELM-FAN.IR

Summary of Contents for Vapor 19.n

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands