Complete 101 Series Installation Manual
99-25517-I001 July 2022 Rev. B
57 |
P a g e w w w . a n t h o n y i n t l . c o m
Section 13 – Removing & Replacing the Torque Rod
Please read the instructions in their entirety. It should answer most of your installation questions. For personal and system safety, and
optimum product performance, make sure you thoroughly understand the contents before installing, using, or maintaining this product.
PROTECTIVE GEAR NOTICE
Protective Eyewear– Potential risk of eye injuries, protective eyewear required when
performing this, and any other associated tasks.
Protective Gloves– Potential risk of injury to your hands, protective gloves required when
performing this, and any other associated tasks.
Footwear Protective – Potential risk of injury to your feet, wearing protective footwear is
required when performing this and any other associated tasks.
You must remove the door from the frame and place a steady flat surface to remove and replace the torque rod. Once the door is safely on a
secure working surface use the following instructions to remove and replace the torque rod.
1.
Carefully place a flathead screwdriver between the door rail and the washer beneath the torque rod. Refer to Figure 13.1.
Figure 13.1 Torque Rod location.
2.
Dislodge the torque rod from its mount by pushing on the torque rod or tapping it loose using a plastic or rubber mallet. Refer to
Figure 13.2.
