Complete 101 Series Installation Manual
99-25517-I001 July 2022 Rev. B
34 |
P a g e w w w . a n t h o n y i n t l . c o m
5.
Engage door with hinge pin inserted into SOCKET (hinge pin plug) receptacle at top of the frame. Push the door into the frame until
the hinge pin snaps in place. See Figure 4.3.
Figure 4.3: Engage Hinge Pin to Frame
WARNING
Never use anything like a hammer, rubber mallet, or another tool to strike the Hinge pin
into the Gib receptacle. Doing this will cause damage to the pin receptacles in the GIB and
cause a short. You must only push this into place gently when completely aligned and
ensure it is locked into position when done. You will feel it and hear a click when it is
engaged properly.
6.
Insert the hold-open bolt through the elongated hold-open slot.
7.
Insert the hold open through stand-off and secure it with a #2 Phillips screw (provided).
8.
Keep the screwdriver perpendicular to the screw head. Make sure the tip is fully seated into the screw head recess before turning.
Figure 4.4: Secure hold-open mounting screw
