Complete 101 Series Installation Manual
99-25517-I001 July 2022 Rev. B
109 |
P a g e w w w . a n t h o n y i n t l . c o m
Figure G.2: Cylinder lock exploded view
1.
Remove gasket from door rail containing the lock (leaving the gasket on the remaining door rail assembly for easy reassembly).
2.
Remove plastic cover from the door rail containing the lock assembly to expose access to the lock mount.
3.
Insert a large Phillips-head screwdriver into the lock access at the back of the door rail. See Figure G.3A.
NOTICE
Note: Once the lock screw has been removed, the screw washers and lock latch will come
loose. Be certain that these components are secure before the removal of the lock screw, or
they may become lost if dropped inside of the door rail. Refer to Figure G.3B.
Figure G.3: Lock Screw removal
A
B
4.
Turn the lock screw counterclockwise to loosen the screw.
5.
Carefully remove the screw, lock washers, and lock strike from the back of the lock assembly. Refer to Figure G.3B.
