DPM-OTR
Version 1
2019-01-28
21
CAN I STORE MY VEHICLE LONG TERM WITH THE MONITOR ON?
The monitor draws 60mA to 125 mA of amperage when it is powered and fully functional.
The monitor could drain the vehicle's battery over an extended period of time. Hooking
the monitor up to enable the sleep mode will drastically reduce the power consumption
over a long period. If storing a vehicle for over 3 months, consider unplugging the
monitor and removing the sensors when the vehicle will be in storage. (TIP: Clean egg
cartons or plastic bags work well for storing the sensors.) Each Sensor has its own serial
number laser etched into the cover. Be sure to enter these ID numbers in the diagram
on page 7 so sensors will be replaced on the same tire when reinstalling them,
eliminating the need for reprogramming. If a low-pressure alert is given while in storage,
the sensor will transmit the alert until the pressure is corrected. This constant
transmission could dramatically affect the battery life of the sensor. Note, sensors will
shut down and stop transmitting when the air pressure reaches 5 PSI or less. When
reinstalling the system, power the monitor first, and then screw sensors onto their
original wheel locations. Pressure readings will be displayed within 8 minutes and the
360OTR system will now be active.
HOW DO I CHECK THE TIRE PRESSURES?
The pressures are updated to the 360OTR Monitor every 8 minutes under normal
circumstances. While the monitor is in Normal Operation mode, use the “Left”, “Right”,
“Up”, and “Down” buttons to navigate to the desired tire. Note, press the “S” button to
toggle the backlight on and off.
WHAT HAPPENS IF A SENSOR IS REMOVED TO INFLATE OR CHECK THE
PRESSURE OF A TIRE?
It is recommended that tire pressures be checked regularly using a quality pressure
gauge when the tires are at ambient temperatures. Remove the sensor, check pressure,
and inflate if necessary. When you return the sensor to the valve stem, the sensor will
begin to read the current pressure and return to its normal operation. With the 360OTR
system you can air up a low tire with the tire being warm and replace the sensor without
worrying about the sensor giving a false alarm, unlike some of the other systems
available on the market.
HOW DO I DELETE A SENSOR?
See page 13 for full details on sensor deletion.
WHAT SHOULD BE DONE IF AN ALERT IS DISPLAYED?
Alerts indicate that the vehicle is being operated in a dangerous condition. When an
alarm is triggered, STOP and check the tire(s) as soon as safely possible and
investigate. Be sure to check the valve stem for damage. Soapy water can be used to
identify leaks.
WHAT MAKES MY SYSTEM SENSORS TRANSMIT?
Sensors will transmit data to the monitor under the following conditions:
1)
Sensors update with a signal every 8 minutes.
