DPM-OTR
Version 1
2019-01-28
8
3)
Be sure to properly program sensors to the desired positions. Use
the diagram in Figure 2-3 to record the three digit serial numbers (See
Figure 2-2 for the three digit number location) and corresponding tire
positions for programming.
4)
Select the desired tire position using the arrow buttons.
Hold down the “S” button until the first of the three dashes
begins to blink (See Figure 2-4).
5)
Input the three digit sensor serial number located on the sensor using the “Up” and
“Down” arrows to adjust the numeric value and the “Left” and “Right” arrows to
change the digit being adjusted (See Figure 2-2 for
the three digit number location). Once the serial
number is entered, press and hold the “S” button for
3 Seconds until the number flashes and audible
beeps are heard. See Figures 2-5, 2-6, and 2-6a.
Figure 2-2
Figure 2-3
Figure 2-4
Figure 2-5
