background image

DPM-OTR  

Version 1 

2019-01-28 

24

LLC, be the repair or replacement of such defective product, or the refund of the purchase price therefore.   
No other remedy shall be available. 

 

EXCLUSIONS  FROM  COVERAGE:    This  Limited  Warranty  does  not  apply  to  any  claims  arising  from 

misuse, abuse, unauthorized repair or alteration, circumstances where the DORAN 360OTR is improperly 
installed or improperly wired contrary to the DORAN 

360OTR 

product instructions; or damage or defect 

attributable to fire or other casualty, including, without limitation, acts of God or exposure to abrasive or 
corrosive materials or pollutants, or attributable to collision or other accidents involving motorcycles upon 
which the DORAN 

360OTR

 is installed. 

 

LIMITATIONS:  THIS  LIMITED  WARRANTY  IS  EXPRESSLY  IN  LIEU  OF  ALL  OTHER  EXPRESS  OR 

IMPLIED  WARRANTIES,  INCLUDING  WITHOUT  LIMITATION,  THE  IMPLIED  WARRANTY  OF 
MERCHANTABILITY AND THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, 

AND ALL OF ALL OTHER OBLIGATIONS OR LIABILITIES ON THE PART OF DORAN MFG. LLC. THIS 
LIMITED WARRANTY SPECIFICALLY EXCLUDES ALL INCIDENTAL, SPECIAL, OR CONSEQUENTIAL 
DAMAGES.  IN NO EVENT, AND FOR NO CAUSE WHATSOEVER, SHALL DORAN MFG. LLC HAVE 

ANY LIABILITY TO ANY PARTY IN EXCESS OF THE ORIGINAL PURCHASE PRICE OF THE PRODUCT 
IN QUESTION. 

 

EXCLUSIVE AGREEMENT:  This Limited Warranty is a complete and exclusive statement of the warranties 
which apply to the DORAN 

360OTR

.  There are no express or implied warranties beyond those expressly 

stated above.  No employee, agent, dealer or other person is authorized to give any warranties on behalf 
of DORAN Mfg. LLC, except as authorized in writing. 

 

STATUTE OF LIMITATIONS.  In purchasing the DORAN 

360OTR

 you agree that any action for breach 

of contract or warranty must be commenced within one year after the cause of action has accrued.  

 

PROCEDURE:  Products determined to be defective within the terms of this Limited Warranty should be 

returned to DORAN Mfg. LLC, transportation prepaid.  Call DORAN Mfg. LLC for return authorization.  No 
unauthorized  returns  shall  be  accepted.  Sender  is  responsible  for  all  costs  incurred  in  the  removal  or 
reinstallation and shipping of the returned product.  A copy of the invoice from the point of purchase must 

accompany the returned product.   

 

APPLICABLE LAW: The internal laws of the State of Ohio, U.S.A. shall govern this Limited Warranty, and 

the exclusive venue for any dispute in connection with the purchase or use of the product shall be the state 
and federal courts of general jurisdiction located in Hamilton County, Ohio U.S.A.       

 
 
 

 
 
 

 
 

 

SPECIAL NOTICE TO CONSUMERS: If you have purchased this product for person, family or household 

use: 

 

(1) 

Some states do not permit disclaimers or term limitations of implied warranties so that the 
disclaimers and limitations in this Limited Warranty may not apply to you; 

(2) 

Some  states  do  not  permit  the  exclusion  or  limitation  of  incidental  or  consequential 
damages so that the exclusions and limitations in this Limited Warranty may not apply to 
you; and 

(3) 

This Limited Warranty gives you specific legal rights and you may have other rights that 
vary from state to state. 

 

 

Summary of Contents for 360OTR




























Reviews: