Doosan G10WMI-2D-T2, Installation, Operation & Maintenance Manual

Page: 30 / 106

Operation & Maintenance Manual Operating Instructions
30 22637300
Operating Instructions
Never operate unit without first observing all safety warnings and carefully reading the
operation and maintenance manual shipped from the factory with this machine.
BEFORE TOWING
WARNING
!
Failure to follow these instructions can cause severe injury or death.
CAUTION
!
- Position the tow vehicle to align its hitch with the pintle eye or coupler.
- Engage the parking brake and chock the wheels of the tow vehicle.
- Stand to the side and ensure pin is FULLY inserted (secure) in tube of
jack.
- Crank jack to lower pintle eye coupler onto the hitch and to raise foot off
the ground. Pull pin from tube of jack. Fold jack handle down and forward.
Swing up jack tube and FULLY insert pin in tube.
- Connect machine towing lights to tow vehicle.
- Remove chocks from tow vehicle wheels.
Steps for determining correct load limit -
1. Locate the statement “The weight of cargo should never exceed xxx kg or xxx lbs” on
your vehicle’s placard.
2. This figure equals the available amount of cargo and luggage load capacity.
3. Determine the combined weight of luggage and cargo being loaded on the vehicle.
That weight may not safely exceed the available cargo and luggage load capacity.