Doosan G10WMI-2D-T2, Installation, Operation & Maintenance Manual

Page: 40 / 106

Operation & Maintenance Manual Operating Instructions
40 22637300
1.
1. Allow the engine to warm-up for 3 to 5 minutes. If the engine stops
unexpectedly, refer to Trouble Shooting Section.
2. Check the CONTROL Panel for proper voltages. No RED diagnostic lamps
should be glowing. Otherwise, shut down the unit and refer to Trouble Shooting
Section.
3. With main breaker “ON” power is present and available for use.
4. Close side doors for optimum cooling of the unit while running.
STOPPING (KEYSTART MODELS)
1. Turn off all external electrical power loads.
2. Turn Main Breaker “OFF”.
3. Allow 5 minute cool down.
4. Turn the Engine Start Switch to “OFF”.
5. Fill fuel tank at end of working day to prevent condensate.
DIAGNOSTICS and AUTO SHUTDOWN (KEYSTART MODELS)
On some models, the operating controls and instruments are arranged on the control panel as
shown. A description of each panel device is as follows:
1. High Engine Temperature - Indicates engine shutdown due to high engine
coolant temperature.
2. Low Engine Oil Pressure - Indicates engine shutdown due to low engine oil
pressure.
3. Low Fuel Level - Indicates engine shutdown due to low fuel level.
4. High Containment Fluid Level - Indicates high fluid level in the containment
base.