DOMUSA TEKNIK Fusion Hybrid Gas Condens Page 33 Installation And Operating Instructions Manual Download

Page: 33 / 80

7.4

Operation with the DHW selector

(27)

For greater comfort in DHW, by means of the DHW selector

(27)

, it is possible to change the operating

mode and energy source that will work on the DHW demand.

By turning the DHW selector

(27)

to position the supporting module becomes the main energy

source for the DHW demand. The heat pump stops managing the production of DHW, leaving the

heating and production of DHW to the module. The DHW temperature for this operating mode will
become the maximum selectable in the heat pump.

In this operating mode, the display of the temperature of the DHW tank becomes

“

”

in a fixed way,

this being not its real temperature, as the complete management of the temperature of the DHW tank

is performed by the supporting module.

7.5

Operation with the Heating selector

(28)

For greater comfort in heating, by means of the heating selector

(28)

, it is possible to change the

operating mode and energy source that will work on the heating demand.

By turning the heating selector

(28)

to position the supporting module becomes the main energy

source for heating. The heat pump stops managing the heating demand, leaving the complete
management to the module.

The heating temperature for this operating mode will be the one selected in the module, see

“

Selecting the module setpoint temperature

”.

Summary of Contents for Fusion Hybrid Gas Condens

















































































Search results

Summary of Contents for Fusion Hybrid Gas Condens

Reviews:

Related manuals for Fusion Hybrid Gas Condens

Brands by name

Popular brands

DOMUSA TEKNIK Fusion Hybrid Gas Condens, Installation And Operating Instructions Manual

Search results

Summary of Contents for Fusion Hybrid Gas Condens

Reviews:

Related manuals for Fusion Hybrid Gas Condens

Brands by name

Popular brands