manualshive.com logo in svg

DOMUSA TEKNIK Fusion Hybrid Gas Condens, Installation And Operating Instructions Manual, Page: 37 / 80

Share
Download
DOMUSA TEKNIK Fusion Hybrid Gas Condens Installation And Operating Instructions Manual Download Page 37

 

 

35

9

 

TECHNICAL MENU 

The electronic control of the 

Fusion Hybid Gas Condens

 module has a menu of technical parameters, 

with which the operation of the module is managed. Any incorrect adjustment of any of these may 
cause a breakdown and/or rupture of the machine. Therefore, most parameters of the 

"Technical 

Menu

 should only be modified by personnel authorised by 

DOMUSA TEKNIK

. Nevertheless, some 

technical parameters will be useful for the installer and/or user, and should be adjusted by them, 

depending on the desired performance characteristics in the home. 

9.1

 

Access to the “

Technical Menu”

 

To access the 

“Technical Menu

” parameters, follow the instructions below: 

 

 

Press the buttons 

 and 

RESET

 simultaneously until the circle is 

completed. 

 

The display shows the parameter (01) and the value of the parameter 

(00). 

Please note: Do not change this parameter 

 

Browse through the 

"Technical Menu"

 parameters with the heating 

temperature adjustment buttons. 

 

 

 

Modify the parameter value using the DHW temperature 

adjustment buttons. 

 

 

To save the value, press 

RESET

 until the circle is completed. 

 

To exit the 

“Technical Menu”

, press the buttons 

 and 

RESET

 

simultaneously until the circle is completed. 

Summary of Contents for Fusion Hybrid Gas Condens

















































































Reviews:

No comments