DOMUSA TEKNIK Fusion Hybrid Gas Condens Page 2 Installation And Operating Instructions Manual Download

Page: 2 / 80

Thank you for choosing a

DOMUSA TEKNIK

heating boiler. You have

chosen the

Fusion Hybrid Gas Condens

model from the

DOMUSA

TEKNIK

product line. With a suitable hydraulic installation, this gas-

fired module will provide the ideal level of comfort for your home. You

will also be able to enjoy a balanced, economical supply of domestic

hot water.

This document constitutes an essential part of the product and must

be delivered to the end user. Please carefully read the warnings and

advice contained in this manual, as they provide important

information regarding the safety of the installation, as well as use and

maintenance.

These boilers must be installed by qualified personnel only, in

accordance with the legislation in force and following the

manufacturer's instructions.

Start-up of these boilers and any maintenance operations must only be
carried out by

DOMUSA TEKNIK

’s Authorised Technical Assistance

Services.

This device can be used by children aged 8 years and above and

people with reduced physical, sensory or mental abilities or without

experience and knowledge, provided that they have been given

appropriate supervision or training regarding the use of the device in a

safe manner and that they understand the dangers involved. Children
should not play with the device. Cleaning and maintenance should be

carried out by the user should not be carried out by children without

supervision.

Incorrect installation of these boilers could result in damage to people,

animals or property, and the manufacturer will hold no liability in such
cases.

DOMUSA TEKNIK

, in compliance with item 1 of the first additional

provision of Act 11/1997, hereby informs that the person in charge of

delivering the container waste or used container, for its correct

environmental management, will be the final holder of the product

(Article 18.1 of Royal Decree 782/1998). At the end of its useful life, the
product must be taken to a selected collection point for electrical and

electronic equipment or must be returned to the distributor at the

time of purchasing a new equivalent appliance. For more detailed

information on the collection diagrams available, please contact either

the collection facilities of the local authority or the distributor where
the purchase was made.

Summary of Contents for Fusion Hybrid Gas Condens

















































































Search results

Summary of Contents for Fusion Hybrid Gas Condens

Reviews:

Related manuals for Fusion Hybrid Gas Condens

Brands by name

Popular brands

DOMUSA TEKNIK Fusion Hybrid Gas Condens, Installation And Operating Instructions Manual

Search results

Summary of Contents for Fusion Hybrid Gas Condens

Reviews:

Related manuals for Fusion Hybrid Gas Condens

Brands by name

Popular brands