Fusion Hybrid Gas Condens
18
CAUTION
The terminal must be fitted with suitable protection if it is less than 2 metres from a balcony, on a
flat roof or surface that could be accessed by people.
The wall the gas removal and air intake ducts are fixed to must not be made of combustible or
flammable materials, and the wall the end of the duct passes through must lead to the outside of
the home. There must be no hazardous materials or obstructions near the duct.
If the outlet passes through a wall made of combustible material the end terminal must be covered
with at least 20 mm of incombustible material and must be at a distance of at least 50 mm from any
flammable material.
The parts connecting the flue gas outlet must be correctly joined using sealing gaskets. Check there
are no leaks from any part of the removal circuit.
Switch off the boiler and wait for the pipes to cool down before cleaning the gas removal and air
intake ducts.
The gas removal and air intake ducts must be protected from snow accumulation.
: All accessories used for combustion product removal and air intake should be
those supplied by DOMUSA TEKNIK.
However, it is also possible for type C63 evacuations, to use other manufacturers accessories for air
inlet and gas evacuation, as long as they are duly certified with their corresponding CE marking and
are suitable for boiler working conditions.
: There must be taken into account the regulations of each country in the field of
construction and installations for the assembly and commissioning of the
heating installation.
For the correct installation of accessories for air inlet and gas evacuation of other manufacturers
(type C63) the following information must be taken into account:
- It is advisable to fit the removal pipe in a slightly upwardly-inclined direction, at around 2-3º, thus
preventing any water and condensation from dripping out.
- The surface temperature in the combustion air duct is below 85 ° C
- The air intake must not be located on a wall opposite a flue gas extraction system, as it could take
in the gases emitted.
