Fusion Hybrid Gas Condens
32
For a better comfort in the air conditioning, by the heating selector
(28)
, it is possible to change the
operating mode in air conditioning demand.
By turning the heating selector
(28)
to position
the heat pump begins working exclusively in air
conditioning mode. The heat pump stops managing the heating demand by focusing its operation
exclusively on air conditioning. The DHW demand will be managed according to the DHW selector
(27)
.
By combining the operating modes in the heating selector
(28)
in position
and the DHW selector
(27)
in position an uninterrupted air conditioning operation is achieved with the heat pump, while
the support module manages the DHW demand.
7.6
Operation with room thermostat
The
Fusion Hybrid Gas Condens
module
Avanttia NG
boiler includes a connection prepared for
the installation of a room chronothermostat or ambient room thermostat (
see
"Connection of the
room thermostat"
), which allows the management of the boiler's operation depending on the
temperature inside your home. Optionally,
DOMUSA TEKNIK
offers a wide range of such devices in
its product catalogue.
The installation of a room thermostat will optimise the installation’s performance, adapting the
heating and air conditioning to the requirements of your home and obtaining enhanced comfort.
Additionally, if the thermostat allows the operating hours to be programmed (chronothermostat), it
can adapt the system to the hours of use of the installation.
